PACE-OneTM G2 is an easy to install electronic control system that when fully enabled limits a vehicle’s top travel speeds and modifies acceleration rates.PACE-One G2 ensures safer travel speed(s), reduces fuel consumption and tire wear.PACE-One G2 is composed of an Electronic Control Module and wiring harness.
PACE-One G2 TRACTION PACE-One Speed Limiter is available as a stand-alone product or can be purchased with Traction Control. PACE-One Traction Control has all the features of the standard Speed Limiter unit plus traction control. Traction Control prevents the drive tires from free spinning when a forklift operates on slick surfaces such as ice, oil, water, dust and ash covered surfaces. The system further limits tire spinning when the inching pedal is dumped at high engine RPMs.
Speed Limiter The prime function of PACE-One G2 is to limit a vehicle’s top travel speed.On a forklift, that can be two speeds (different Forward and Reverse speeds).Further tuning of the speeds is configured via the SpeedWiz tuner.SpeedWiz controls when speed modifications occur as well as load corrections and speed overshoot.A properly tuned system will feel much like a vehicle cruise control.PACE-One G2 will NOT affect working hydraulics.
Throttle Ramp A vehicle’s acceleration rate can be modified via settings within Throttle Ramp.Throttle Ramp is easily modified by extending the time it takes for the throttle pedal to get from Idle to Wide Open Throttle.Increasing the time within Throttle Ramp reduces tire spin, fuel usage and tire wear.It’s important to note that modifications to the Throttle Ramp will also affect hydraulics response.
Additional Features Capture PACE-One G2 expands on the capture feature found in the previous generation ECM to not only capture Idle and Wide-Open-Throttle settings but Voltage and Hertz settings from a moving vehicle.In other words, you can drive the truck and click on any key on your laptop and save the settings for which you were traveling as a top speed setting. Fault Detection and Data logging Should an Output Fault be detected within the ECM, internal fault detection will help identify where the error is coming from.Data logging records data from various inputs to help identify why an error occurred. DOT-Lok/PACE-One Combos The PACE-One G2 speed limiter can also be purchased as a combo kit to include all DOT-Lok MPE shift inhibitor features including with or without Traction Control.